 |
Product parameter
Medium strength (similar to 6061) and good weldability, corrosion resistance, used in transportation and structural engineering industries.
Chemical composition ,Standard (max), W% | Al: balance | ||||||
Si | Fe | Cu | Mn | Mg | Zn | Cr | Ti |
0.7-1.3 | 0.5 | 0.1 | 0.4-1 | 0.6-1.2 | 0.2 | 0.25 | 0.1 |
Mechanical Property | T6 | T651 |
Tensile Strength(MPa) | ≥ 295 | ≥ 295 |
Yield Strength(MPa) | ≥240 | ≥240 |
Elongation(%) | ≥7 | ≥8 |
Different thickness,the above values will be different, just for reference.
Product Description
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace AA6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
Due to its strength and corrosion resistance, Alumiunium Sheets of alloy 6082 are typically used in construction of Trusses, bridges, cranes and in other transport applications.
The interior has been scanned and tested by various advanced instruments.
Smooth surface, high flatness.
Thickness tolerance about ±1%.
Thickness<100mm, there is a protective film covering the surface (random color).
We have more than ten cutting equipment and machines.
Thickness<8mm, we sale whole plate only. The whole plate is able to be cut to smaller size.
Thickness not less than 8mm, we sale the small pieces in any dimensions.
Our system ensures all the products are traceable to provide the original factory certificate.
Product parameter
Medium strength (similar to 6061) and good weldability, corrosion resistance, used in transportation and structural engineering industries.
Chemical composition ,Standard (max), W% | Al: balance | ||||||
Si | Fe | Cu | Mn | Mg | Zn | Cr | Ti |
0.7-1.3 | 0.5 | 0.1 | 0.4-1 | 0.6-1.2 | 0.2 | 0.25 | 0.1 |
Mechanical Property | T6 | T651 |
Tensile Strength(MPa) | ≥ 295 | ≥ 295 |
Yield Strength(MPa) | ≥240 | ≥240 |
Elongation(%) | ≥7 | ≥8 |
Different thickness,the above values will be different, just for reference.
Product Description
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace AA6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.
Due to its strength and corrosion resistance, Alumiunium Sheets of alloy 6082 are typically used in construction of Trusses, bridges, cranes and in other transport applications.
The interior has been scanned and tested by various advanced instruments.
Smooth surface, high flatness.
Thickness tolerance about ±1%.
Thickness<100mm, there is a protective film covering the surface (random color).
We have more than ten cutting equipment and machines.
Thickness<8mm, we sale whole plate only. The whole plate is able to be cut to smaller size.
Thickness not less than 8mm, we sale the small pieces in any dimensions.
Our system ensures all the products are traceable to provide the original factory certificate.
