 |
Purchase notes
Please make sure the size and quantity.
Calculate the weight=0.785*dia. *dia. * length(mm)*2.8/1000000*quantity.
for example, one piece φ30mm*600mm, weight= 0.785*30*30*600*2.88/1000000*1=1.22(kg).
If the length is short,cutting losses should be added.
1-3mm tolerance is reserved for the length and width of the cut.
Copper is the main trace element. It has high strength and can be strengthened by heat treatment. The strength is only second to 7 series. It's usually used in structural materials, but could also be forged.
It could be used for structural parts of aircraft, structure parts of building and transportation tools, mould, mechanical parts requiring high strength, cabinet shell etc.
Chemical composition, Standard (max), W% | Al: balance | ||||||
Si | Fe | Cu | Mn | Mg | Zn | Ti | Ni |
0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.3 | 0.15 | 0.1 |
The 2A12 aluminum alloy primarily consists of aluminum, along with copper as the main alloying element, and trace amounts of other elements such as magnesium and manganese. This specific composition endows the 2A12 aluminum bar with remarkable strength and hardness. It exhibits a high tensile strength, enabling it to withstand significant mechanical loads without deformation or failure. At the same time, it has good fatigue resistance, which means it can endure repeated stress cycles over an extended period, making it reliable in applications where cyclic loading is common.
Cutting and packing
We have more than ten cutting equipments.
length=3000mm, can be cut to small sizes.
To buy full size, or big order,please contact for more.
Use ERP system management, all materials can be traced.
Typical application
Customers use the materials we provide to make a variety of products.
Using high-quality aluminium can make your product quality better and more stable, and enhance market competitivene.
Purchase notes
Please make sure the size and quantity.
Calculate the weight=0.785*dia. *dia. * length(mm)*2.8/1000000*quantity.
for example, one piece φ30mm*600mm, weight= 0.785*30*30*600*2.88/1000000*1=1.22(kg).
If the length is short,cutting losses should be added.
1-3mm tolerance is reserved for the length and width of the cut.
Copper is the main trace element. It has high strength and can be strengthened by heat treatment. The strength is only second to 7 series. It's usually used in structural materials, but could also be forged.
It could be used for structural parts of aircraft, structure parts of building and transportation tools, mould, mechanical parts requiring high strength, cabinet shell etc.
Chemical composition, Standard (max), W% | Al: balance | ||||||
Si | Fe | Cu | Mn | Mg | Zn | Ti | Ni |
0.5 | 0.5 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.3 | 0.15 | 0.1 |
The 2A12 aluminum alloy primarily consists of aluminum, along with copper as the main alloying element, and trace amounts of other elements such as magnesium and manganese. This specific composition endows the 2A12 aluminum bar with remarkable strength and hardness. It exhibits a high tensile strength, enabling it to withstand significant mechanical loads without deformation or failure. At the same time, it has good fatigue resistance, which means it can endure repeated stress cycles over an extended period, making it reliable in applications where cyclic loading is common.
Cutting and packing
We have more than ten cutting equipments.
length=3000mm, can be cut to small sizes.
To buy full size, or big order,please contact for more.
Use ERP system management, all materials can be traced.
Typical application
Customers use the materials we provide to make a variety of products.
Using high-quality aluminium can make your product quality better and more stable, and enhance market competitivene.
