 |
Product parameter
Trace elements of manganese - based aluminum alloy, low strength, good corrosion resistance, good welding performance.
It's used for processing parts and components that need good formability, high corrosion resistance and weldability, such as heat exchangers, kitchen utensils, food and chemical storage devices, pipelines etc
Chemical composition ,Standard (max), W% | Al: balance | ||||||
Si | Fe | Cu | Mn | Mg | Zn | Ti | Other |
0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 0.1 | - | - |
Mechanical Property (Standard Value) | H112 | H24 |
Tensile Strength(MPa) | ≥ 100 | ≥ 145 |
Yield Strength(MPa) | ≥40 | ≥ 115 |
Elongation(%) | ≥18 | ≥ 6 |
Product Description
AA 3003 is alloyed with 1.20% manganese, which increases the strength of AA 3003 over commercially pure aluminium (1100 series). AA 3003 has excellent workability, weldability, and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for an aluminium with good weldability.
Aluminium alloy 3003 sheets exhibit moderate strength and very good corrosion resistance which makes it an ideal alloy to use for jacketing on mechanical insulation systems. It is widely used for stampings, spun and drawn parts and products, cooking utensils, chemical equipment, builders hardware, storage tanks, truck and trailer components, mail boxes, cabinets, fan blades, awnings, siding, kitchen equipment, decorative trim, architectural uses, signage applications
The interior has been scanned and tested by various advanced instruments.
Smooth surface, high flatness.
Thickness tolerance about ±1%.
Thickness<100mm, there is a protective film covering the surface (random color).
We have more than ten cutting equipment and machines.
Thickness<8mm, we sale whole plate only. The whole plate is able to be cut to smaller size.
Thickness not less than 8mm, we sale the small pieces in any dimensions.
Our system ensures all the products are traceable to provide the original factory certificate.
Product parameter
Trace elements of manganese - based aluminum alloy, low strength, good corrosion resistance, good welding performance.
It's used for processing parts and components that need good formability, high corrosion resistance and weldability, such as heat exchangers, kitchen utensils, food and chemical storage devices, pipelines etc
Chemical composition ,Standard (max), W% | Al: balance | ||||||
Si | Fe | Cu | Mn | Mg | Zn | Ti | Other |
0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | 0.1 | - | - |
Mechanical Property (Standard Value) | H112 | H24 |
Tensile Strength(MPa) | ≥ 100 | ≥ 145 |
Yield Strength(MPa) | ≥40 | ≥ 115 |
Elongation(%) | ≥18 | ≥ 6 |
Product Description
AA 3003 is alloyed with 1.20% manganese, which increases the strength of AA 3003 over commercially pure aluminium (1100 series). AA 3003 has excellent workability, weldability, and good corrosion resistance. It is used for drawing, forming, spinning, fuel tanks, sheet metal works and other applications that require moderate strength for an aluminium with good weldability.
Aluminium alloy 3003 sheets exhibit moderate strength and very good corrosion resistance which makes it an ideal alloy to use for jacketing on mechanical insulation systems. It is widely used for stampings, spun and drawn parts and products, cooking utensils, chemical equipment, builders hardware, storage tanks, truck and trailer components, mail boxes, cabinets, fan blades, awnings, siding, kitchen equipment, decorative trim, architectural uses, signage applications
The interior has been scanned and tested by various advanced instruments.
Smooth surface, high flatness.
Thickness tolerance about ±1%.
Thickness<100mm, there is a protective film covering the surface (random color).
We have more than ten cutting equipment and machines.
Thickness<8mm, we sale whole plate only. The whole plate is able to be cut to smaller size.
Thickness not less than 8mm, we sale the small pieces in any dimensions.
Our system ensures all the products are traceable to provide the original factory certificate.
